13″ Concrete Floor and Edge Grinder – 120 Volt Scan Combiflex 330 –
- 120 Volt
- 13-inch grinding path
- Solid steel dust shroud
- 750 RPM
- Grinding rates between 250–425 sq ft per hour
- Available in 110V and 230V models
3 in stock
Monthly payments at 0% interest* APPLY NOW – >
Finance for 12 or 24 months and pay zero interest.
– Pay only $99 for the first 6 months*
– Pay only $99 per month for your first 6 monthly payments.
The remaining terms range from 12 to 60 months.
*On Approved Credit (OAC)
Volts 110/120
Amps 10 amps
Weight 154 lbs
RPMs 600
Width 13
Brand Scanmaskin
Condition New
Diameter (in.) 13
Powered By Electric
Horsepower 2
Category Edge Grinder, Floor Grinders
Operating Speeds Variable
Electrical Phase Single
The ScanCombiflex 330 RS (SC-330 RS) is a powerful and easy-to-use machine and is one of the most versatile machines on the market. SC330 RS is equipped with adjustable speed. The 330 mm / 13-inch single grinding disc is effective for grinding smaller areas, edging long stretches of the floor, lite coating removal, and surface prep. A simple and quick adjustment allows the operator to change the configuration of the SC-330 RS from a small grinder into an edger, with the entire process taking less than one minute.
The 330 mm / 13-inch disc on the SC-330 RS can be configured with 3, 6, or 9 of our metal,
ceramic, or resin bond diamond tools. This allows the machine to cut more aggressively when necessary, or grind softer surfaces by spreading out the weight and using more tools. For smooth and simple transport, the SC-330 RS can easily be separated into two parts, each weighing well under 100 lbs.
TECHNICAL SPECIFICATION
| 1-phase | |
| Voltage: 110-120 V 1~ or 220-240 V 1~ | |
| Motor power: 1,1 kW or 1,5 kW | |
| Current: 15 Amp. or 10 Amp. | |
| Frequency: 50-60 Hz | |
| Grinding speed: 150-400 rpm or 250-750 rpm | |
| Grinding disc: 1 x 330 mm / 13” | |
| Grinding width: 330 mm / 13” | |
| Weight: 70 kg / 154 lbs. | |
The Scan Combiflex 330 (SC-330) is a powerful and easy to use machine, and is one of the most versatile machines on the market. The 330 mm / 13 inch single grinding disc is effective for grinding smaller areas, edging long stretches of the floor, lite coating removal and surface prep. A simple and quick adjustment allows the operator to change the configuration of the SC-330 from a small grinder into an edger.
The 330 mm / 13 inch disc on the SC-330 can be configured with 3, 6, or 9 of our metal, ceramic, or resin bond diamond tools. This allows the machine to cut more aggressively when necessary, or grind softer surfaces by spreading out the weight and using more tools. For smooth and simple transport, the SC-330 can easily be separated into two parts, each weighing well under 100 lbs.
The ScanCombiflex 330 is available in several different power configurations, along as single and variable speed (RS - regulated speed).
An optional 14.5 kg / 32 lbs weight is available for Scan Combiflex 330 and increases productivity in most cases.
TECHNICAL DATA
SCAN COMBIFLEX 330 1-PHASE SCAN COMBIFLEX 330 RS 1-PHASE
| Voltage: | 110-120 V 1~ | 220-240 V 1~ | 110-120 V 1~ | 220-240 V 1~ |
| Motor power: | 1,5 kW / 2 hp | 1,5 kW / 2 hp | 1,1 kW / 1,4 hp | 1,5 kW / 2 hp |
| Current: | 20 Amp | 10 Amp | 15 Amp | 10 Amp |
| Frequency: | 60 Hz | 50 Hz | 60 Hz | 50 Hz |
| Grinding speed: | 750 rpm | 600 rpm | 150-400 rpm | 250-750 rpm |
| Grinding disc: | 1 x 330 mm / 1 x 13” | 1 x 330 mm / 1 x 13” | 1 x 330 mm / 1 x 13” | 1 x 330 mm / 1 x 13” |
| Grinding width: | 330 mm / 13” | 330 mm / 13” | 330 mm / 13” | 330 mm / 13” |
| Weight: | 65 kg / 143 lbs | 65 kg / 143 lbs | 70 kg / 154 lbs | 70 kg / 154 lbs |
| Other: | CE-marking | CE-marking | CE-marking | CE-marking |
| SCAN COMBIFLEX 330 3-PHASE | SCAN COMBIFLEX 330 RS 3-PHASE | |||
| Voltage: | 400 V 3~ | 400 V 3~ | ||
| Motor power: | 4 kW / 5 hp | 4 kW / 5 hp | ||
| Current: | 16 Amp | 16 Amp | ||
| Frequency: | 50-60 Hz | 50-60 Hz | ||
| Grinding speed: | 1430 rpm | 250-1500 rpm | ||
| Grinding disc: | 1 x 330 mm / 1 x 13” | 1 x 330 mm / 1 x 13” | ||
| Grinding width: | 330 mm / 13” | 330 mm / 13” | ||
| Weight: | 65 kg / 143 lbs | 70 kg / 154 lbs | ||
| Other: | CE-marking | CE-marking | ||
Recommended vacuum:
Scan Dust 2900 Scan Dust 2900
Additional information
| Weight | 154 lbs |
|---|---|
| Voltage | 110V, 230V |
Only logged in customers who have purchased this product may leave a review.
Product Enquiry
Speed control 330 13″ Grinder 120 Volt
Reviews
There are no reviews yet.